PVC CB Modifications

I was busy, alright.

The thoughts and ideas that flooded my cranium took form in two different components... A new ring generator and a modified frequency generator. I built the generator from scratch using old school technology like circuit boards, resistors, capacitors, and potentiometers, with an extra 9 volt battery that not only allows this unit to run three times longer but with increased amperage. The thought came to me that I should install a few solar collectors to let the sun power this succor up, with some caps to store the unused charge that can be metered out at night, but that idea will have to sit on the back burner for awhile. I got bigger fish to fry.

The ring generator was easier to make than I thought it would be. All it took was an angel-food cake pan and a short piece of PVC pipe for the mold, lots of micron sized particles of aluminum, iron oxide, brass, some ground up crystal shards, and a large mobius coil in the center. I found, in powered applications like this, the smaller the metals, the more powerful the unit becomes. The trade off is, it won't work without some kind of power. That's what the frequency generator is for.

When working with powdered metals it's important to mix the metal with the resin before you pour, otherwise it'll end up like gravy when you add the flour in the last step. It lumps together in dry bubbles of powder. Also, when this resin cures it shrinks. That's a good thing because it releases from the outer sides of the mold but when you use an inner mold, it tends to compress around it, giving it a very tight fit. Unless you can find something a few millimeters larger you'll end up machining the hole. Using vasoline as a release agent helps because the resin won't get past it and makes getting it out of the mold so much easier.

The first test was rather impressive. Firing up the ring with a piece of orgonite in the middle clearly shows the energy signature of the piece your using. This is the best way I know of to tell what shape works best for whatever application you're looking for. For this cloudbuster, a cone tested out as the best shape because of the laser-like energy coming out the top. The opposite end of the scale would be an orb, which sends out energy in all directions.

Assembled, this unit performed spectacularly.

It was a crappy day. One of those fall days you'd rather be somewhere else. Cold, dreary, and horizon to horizon clouds. Perfect for this test. I fired it up, pointed it east and within 15 minutes the sky turned blue where this unit was pointing and tiny droplets of rain came down, indicating the clouds were beginning to break up. The southern sky was still filled with clouds so I repositioned it and within minutes the southern sky began breaking up. A half hour after starting this test, the sky was now blue in the directions I pointed this cloudbuster. You could see the clouds literally falling apart and being replaced by sylphs.

The reflective character of the satellite dish really ramped up the energy flow and focused it like a beam. A nice thing about these dishes are they're easy to mount and swivel in any direction. You'll notice this is a Primestar dish. I got this dish when Primestar was bought out by Direct TV and everyone on the old system had to scrap these old dinosaurs for the new and better dish. If you dig around you'll be sure to find tons of these units for the asking.

I can't help thinking this unit has many more uses than weather modification. I wonder what would happen if I pointed it toward Washington?

cone howitzer

The cone howitzer project I mentioned January 22 is pretty much complete. Not the bread project... the orgonite project.

I don't think I ever spent as much time on an orgonite project as I did on this one. As I mentioned before, a lot of this project didn't make much sense, but I now believe the lesson for this project was to trust my intuition rather than let my head get in my way. I mean, what logical reason is there to mount a 22 caliber barrel on a cannon? Casting all logic and reason aside, I made the dammed thing anyway and in the process I took a few pics.

The heart of this unit is a group of three crystals, quartz, kyanite, and selinite, wrapped with a toroidal mobius coil and embedded in an extremely dense matrix of resin, powdered brass, and aluminum and cured with a frequency of 528Hz blown at it by way of my Peavey amp. This unit was then suspended on three brass rods connecting it to the top cone. The tourmaline was placed below this, along with a small carnelian. The rest of the resin was made up of less dense, basic orgonite material.

For a change, I decided to insert a jack in the side for convenient plugging and unplugging. It wasn't so convenient making it. Every electronic specialty store I went to had nothing designed to embed a female eighth-inch phone jack in resin, let alone orgonite, and I had to build one from the top of a can of stewed tomatoes and some hot glue.

The orange highway cone was the perfect shape for the mold, but by the time I did the last pour the heat from curing began to melt it, creating a few unsightly voids that had to be repaired using a plastic binder and aluminum tape (basically, because I lost my duct tape).

Speaking of losing things... Don't you hate it when every tool you need isn't where you thought it was? I searched a whole day for my trusty bolt cutters, eventually trekking to Lowe's to "borrow" one of their $40 bolt cutters, which I promptly took back after I was done. (Yeah, I know it's a cheap trick but if I went to Home Depot instead, I'd have 2 bolt cutters instead of one that's still lost.)
The same thing happened to my glue gun the next day, but for $1.80 I'll keep the spare glue gun.

In hindsight, I would have been better off using something other than an 1/8th" female phone jack because embedding such a thing in resin leaves no room for error. The only way I got the thing to work was to dig at it with an ice pick and eyeglass screwdriver, sweet-talking it with things like, "come on baby, open up for daddy" for 45 minutes until I could fit the male end in. Talk about foreplay...

The carnelian was a different story. Never, in my wildest imagination, would I have considered placing a single stone in that exact position, at that depth. Admittedly, I never would've build this device in this manner but I was just a simple technician on this project, taking orders from my internal engineer, and this engineer said to place THIS stone in THIS place... right here at 2:30 between the tourmaline and wall... no exceptions, no excuses.

Ok... you da boss and I'm da hoss.

I don't think this unit has anything to do with weather control, but it seems to be geared toward physical, emotional, mental, and spiritual healing and improvement. The crystal selection and position seem to suggest a less than passive unit until fired up with frequency. The extremely dense resin surrounding the three main crystals prevent it from acting like an ordinary orgonite device. In fact, it seems pretty dead just sitting there. It needs power to make it work, and when it's fired up you can almost see wisps of vapor oozing out the top pipe. The cone shape seems to economize the unit, pushing the energy up the top with very little loss from the sides. Only while the frequency is running can you feel a slight vibration in the base.

I'd like to point out that I'm one of those people blessed with never having to put up with headaches, but today I developed a massive one... right after handling this unit with the frequency turned on. I know you can get a headache from touching the pipes on a cloudbuster if you don't touch the base afterward. It's the DOR on the pipes that cause this. It seems this unit does such a good job at kicking ass in an extremely efficient manner that even grounding yourself to the base afterward won't provide enough POR to counteract the bad stuff transfering through the pipe.

More work needs to be done in this area.