caduceus orgone field generator

A while back I made a torus using only sub-micron metal particles, resin, and a large, caduceus mobius coil in the center.  The idea, at the time, was extremely dense orgonite might severely kick ass if a caduceus mobius was involved.

Sadly, the damned thing didn't work, no matter what I did, and it sat on the bench back burner for months.

I discovered fresh orgonite tiles made with the clear resin I've been using is just pliable enough to bend around an object like this caduceus field generator.  After a few hours it sets up hard as a rock but the curing time is slow enough that you can work with this stuff.  During this curing time, you can cut it with a knife and shape it without too much trouble.

Needless to say, the outside medium density tiles make all the difference and powered up this thing rocks!  The energy this unit puts out is most impressive, especially since I forgot to include a core device for the unit to work on.  Throw in a crystal and this thing is extreme!  I mean huge amounts of pinpoint laser energy with a crystal amplifier extreme.  

Since these densities aren't cast with the material, and can be removed, I can clearly prove the effectiveness of cascading densities in a powered unit without having to build one from scratch.  Increasing the power is as easy as adding another layer of tiles.  Theoretically, the medium density orgonite should work in a passive mode well enough to power the inner torus without any frequency at all.

It looks like I'll be busy on this for a few days.

powered pyramid sampler

I got tired of permanently casting stones in resin just to see what they would do. There must be a way to make a device that can sample various stones without having to encase them in resin until the end of time.

On my way home from work it dawned on me...

Why not build a device that will enable me to swap out stones and still maintain a baseline average?

So, I built this Powered Pyramid Sampler. Its heart consists of a large clear quartz with a mobius coil encased in a resin with powdered aluminum and traces of brass. This is the first time I used metal this fine ( 3 or 4 microns). The heart came out resembling gray plastic with a most powerful energy field when fired up. Embed it in this pyramid shape and the energy is then channeled through the peak like a laser. The capstone is made of very fine aluminum and brass in a clear resin. The reason I'm using clear resin in this project is to show the internal workings. I added a bit more catalyst to compress the base compass crystals.

I included a common cantaloupe in the shot to show relative size.

The copper pipe in the base connects directly to the heart and is used to sample various stones to study the effects. The mobius wire is then connected to power this thing up.

My first test was to see if this thing really does work by inserting a lapis, setting it in its upright position, firing it up with 15Hz, and placing it directly under my sleeping chamber.

I fell asleep before my head hit the pillow and that evening was spent in a deep, healthy sea of orgone dreams followed by an instant waking the next morning, full of energy, piss, and vinegar.

If the first test was that successful with lapis, I wonder what fluorite or bloodstone would be like?

This detail shows the gray heart and copper sample pipe with a couple stones.

I gotta tell ya, I'm as impressed with this latest device as I was with my first orgone amplifier. I no longer need to go through all the casting, measuring, and waiting to see the effects of one crystal. Now I can swap stones as easily as changing hats.

So, why am I doing this?

Why would you climb a mountain or read a book?

I'm doing this for a number of reasons.
1. I can.
2. I want to reduce pain and increase pleasure.
3. I want everyone and everything to experience better physical, mental, spiritual, and emotional health.
4. To use a metaphor, I'm tired of building a complete computer for every question I want answered.

5. If I want to see what happens if I use a diamond for a sample crystal I won't have to hock my car.

That might be the best reason of all.

cone howitzer

The cone howitzer project I mentioned January 22 is pretty much complete. Not the bread project... the orgonite project.

I don't think I ever spent as much time on an orgonite project as I did on this one. As I mentioned before, a lot of this project didn't make much sense, but I now believe the lesson for this project was to trust my intuition rather than let my head get in my way. I mean, what logical reason is there to mount a 22 caliber barrel on a cannon? Casting all logic and reason aside, I made the dammed thing anyway and in the process I took a few pics.

The heart of this unit is a group of three crystals, quartz, kyanite, and selinite, wrapped with a toroidal mobius coil and embedded in an extremely dense matrix of resin, powdered brass, and aluminum and cured with a frequency of 528Hz blown at it by way of my Peavey amp. This unit was then suspended on three brass rods connecting it to the top cone. The tourmaline was placed below this, along with a small carnelian. The rest of the resin was made up of less dense, basic orgonite material.

For a change, I decided to insert a jack in the side for convenient plugging and unplugging. It wasn't so convenient making it. Every electronic specialty store I went to had nothing designed to embed a female eighth-inch phone jack in resin, let alone orgonite, and I had to build one from the top of a can of stewed tomatoes and some hot glue.

The orange highway cone was the perfect shape for the mold, but by the time I did the last pour the heat from curing began to melt it, creating a few unsightly voids that had to be repaired using a plastic binder and aluminum tape (basically, because I lost my duct tape).

Speaking of losing things... Don't you hate it when every tool you need isn't where you thought it was? I searched a whole day for my trusty bolt cutters, eventually trekking to Lowe's to "borrow" one of their $40 bolt cutters, which I promptly took back after I was done. (Yeah, I know it's a cheap trick but if I went to Home Depot instead, I'd have 2 bolt cutters instead of one that's still lost.)
The same thing happened to my glue gun the next day, but for $1.80 I'll keep the spare glue gun.

In hindsight, I would have been better off using something other than an 1/8th" female phone jack because embedding such a thing in resin leaves no room for error. The only way I got the thing to work was to dig at it with an ice pick and eyeglass screwdriver, sweet-talking it with things like, "come on baby, open up for daddy" for 45 minutes until I could fit the male end in. Talk about foreplay...

The carnelian was a different story. Never, in my wildest imagination, would I have considered placing a single stone in that exact position, at that depth. Admittedly, I never would've build this device in this manner but I was just a simple technician on this project, taking orders from my internal engineer, and this engineer said to place THIS stone in THIS place... right here at 2:30 between the tourmaline and wall... no exceptions, no excuses.

Ok... you da boss and I'm da hoss.

I don't think this unit has anything to do with weather control, but it seems to be geared toward physical, emotional, mental, and spiritual healing and improvement. The crystal selection and position seem to suggest a less than passive unit until fired up with frequency. The extremely dense resin surrounding the three main crystals prevent it from acting like an ordinary orgonite device. In fact, it seems pretty dead just sitting there. It needs power to make it work, and when it's fired up you can almost see wisps of vapor oozing out the top pipe. The cone shape seems to economize the unit, pushing the energy up the top with very little loss from the sides. Only while the frequency is running can you feel a slight vibration in the base.

I'd like to point out that I'm one of those people blessed with never having to put up with headaches, but today I developed a massive one... right after handling this unit with the frequency turned on. I know you can get a headache from touching the pipes on a cloudbuster if you don't touch the base afterward. It's the DOR on the pipes that cause this. It seems this unit does such a good job at kicking ass in an extremely efficient manner that even grounding yourself to the base afterward won't provide enough POR to counteract the bad stuff transfering through the pipe.

More work needs to be done in this area.

it's not just bread anymore

Some of you know I've been experimenting with bread making because I'm not all that crazy about the mass produced, preservative-loaded stuff that can sit on a shelf for a week after it's made. The small, local bakeries that are still around make their bread at 5 a.m. in vast quantities to carry them throughout the day. The gourmet breads are good but they are sometimes made hundreds of miles away and sit around for days before someone buys them for 4 dollars a loaf. 4 Bucks a loaf? All bread consists of is flour with some trace amounts of sugar, salt, and yeast. What's the big deal? Humans have been making bread since the beginning of the agricultural revolution. Should this secret of bread making be entrusted only to the big bread makers and bakeries too small to be absorbed by Big Agra? I think not!

I'm ashamed to say Americans don't have the slightest clue what bread is. The perfectly shaped, mass produced bubblegum used to hold our peanut butter and jelly is a testament to the sacrifice of taste and texture most Americans traded for the convenience of fast food at home.

I made a commitment this year to stop buying store bread and make my own instead. I found it's not nearly as difficult as I was lead to believe and doesn't take near as much time as I thought. In fact, the time I spend actually working with the dough is more of a zen exercise than a labor of love. Of course, I'm not totally devoid of technology. I have a bread maker that does a much better job making the dough than I have the patience for, but the zen part comes into play when I kneed it for about a minute and form the shapes I want the bread to be.

Let me give you a rundown of what it takes to produce 4 small loaves of bread.

1 and a third cups hot water, about 2 or 3 tablespoons olive oil, 4 cups flour, 5 teaspoons raw sugar, about 2 teaspoons sea salt, 5 teaspoons yeast. Last night I made onion bread so I tossed in a small handful of dried onion. Plug in the bread maker, adjust it to dough, push the button and work on another project, like orgonite, for an hour and a half. When the bell rings, dump the dough on a floured surface and knead it for about a minute. This is the part no machine can reproduce. This is when you imbue it to be what you want it to be. I prefer a lot of different size holes in my bread with a hard, firm, chewy crust that can stand up to whatever I do with it and still maintain a moist, springy center.

The end result is a ham, salami, and provolone sandwich with lots of real butter and brown mustard.
Try making one of these with Wonder Bread.

During the hour and a half waiting period I contemplated on the heart of my latest orgonite project. The quartz, blue kyanite, and selenite wrapped in a mobius is the foundation of my next project. Since I intend to mount a giant black tourmaline crystal below this unit, I need a larger mold to house it all.

I'm not sure exactly what I'm going to do with this unit once it's built. It's as if I'm being guided to make this device but the purpose of which escapes me. Although the plan is to mount a 4' long, 1" copper pipe, it's not just a cloudbuster. It seems to border on power wand technology and the large tourmaline can only mean this bad boy is intended to neutralize negativity in a big way.

I doused all the components in this device many times and got the same answers. Logically, A larger diameter top pipe would be in order but for some reason the 1" pipe is the size I need. I doesn't make sense. Would you build a cannon with a 22 caliber barrel?