orgone tiles

The question is... how do you encase a crystal in orgonite without making it a permanent part of the piece?

The inner crystal needs to be compressed to work properly, and the orgonite does that rather well by compressing the crystal while it cures.  Since compression is key, I thought about making orgonite tiles to fit around the crystal and compressing them with a coil, then fitting a toroid mobius around the whole thing.  It occurred to me that using the mobius for compression would eliminate a step so I settled on a caduceus for the mobius.

I started out by making a tile from powdered metals and clear resin and slicing it into six equal pieces.  Since every quartz crystal has six sides, the tiles fit perfectly and made a most excellent compression on the crystal.

Orgonite tiles, made in this fashion, opens a whole world of uses from orgonite cocktail coasters to your own personal orgonite shower stall.  Now THAT sounds like an interesting idea.  An orgone accumulator-like chamber you use every day for 20 minutes, plus you have that water thing going.

I wonder if I can make a light weight, portable unit?   

powered pyramid sampler

I got tired of permanently casting stones in resin just to see what they would do. There must be a way to make a device that can sample various stones without having to encase them in resin until the end of time.

On my way home from work it dawned on me...

Why not build a device that will enable me to swap out stones and still maintain a baseline average?

So, I built this Powered Pyramid Sampler. Its heart consists of a large clear quartz with a mobius coil encased in a resin with powdered aluminum and traces of brass. This is the first time I used metal this fine ( 3 or 4 microns). The heart came out resembling gray plastic with a most powerful energy field when fired up. Embed it in this pyramid shape and the energy is then channeled through the peak like a laser. The capstone is made of very fine aluminum and brass in a clear resin. The reason I'm using clear resin in this project is to show the internal workings. I added a bit more catalyst to compress the base compass crystals.

I included a common cantaloupe in the shot to show relative size.

The copper pipe in the base connects directly to the heart and is used to sample various stones to study the effects. The mobius wire is then connected to power this thing up.

My first test was to see if this thing really does work by inserting a lapis, setting it in its upright position, firing it up with 15Hz, and placing it directly under my sleeping chamber.

I fell asleep before my head hit the pillow and that evening was spent in a deep, healthy sea of orgone dreams followed by an instant waking the next morning, full of energy, piss, and vinegar.

If the first test was that successful with lapis, I wonder what fluorite or bloodstone would be like?

This detail shows the gray heart and copper sample pipe with a couple stones.

I gotta tell ya, I'm as impressed with this latest device as I was with my first orgone amplifier. I no longer need to go through all the casting, measuring, and waiting to see the effects of one crystal. Now I can swap stones as easily as changing hats.

So, why am I doing this?

Why would you climb a mountain or read a book?

I'm doing this for a number of reasons.
1. I can.
2. I want to reduce pain and increase pleasure.
3. I want everyone and everything to experience better physical, mental, spiritual, and emotional health.
4. To use a metaphor, I'm tired of building a complete computer for every question I want answered.

5. If I want to see what happens if I use a diamond for a sample crystal I won't have to hock my car.

That might be the best reason of all.

stone age succor punch

I've been playing around with this device for a few weeks and I'm convinced it's totally kick ass.

This succor punch is made from powdered aluminum, powdered brass, copper and aluminum curls in clear resin. The reason it looks dark is because of the extreme density of the mixture. The crystal has a mobius coil embedded in the resin, which is connected to a frequency zapper. In this case, I have the frequency at approximately 14Hz, and you can really feel it moving in your hand.

I can get away with larger pieces of metal in passive devices like TBs and HHGs, but if power is involved, ultra-fine metal particles are an absolute must if you want to get the most out of the device. Because about 20% of this unit has some larger metal chips, it's a good stand-alone cleaner, but when you hit that frequency it really takes off, and when you feel the rhythmic pulsations in your hand, you know you have some unexplained power.

I really like the crude appearance this thing took on. It has a primitive, high-tech look, as if someone tried to make a phaser out of a dinosaur bone, and it's totally ergonomic.


I was looking for a mold that would have a gentle bend, but the closest I could find was a piece of 2"id reinforced neoprene hose, which I had to reshape with a pair of large c-clamps. The end result looks like a telephone from the bronze age.

Ok, so what's this thing supposed to do and why are you doing it?

Well, since you asked...

A properly built succor punch with the proper frequency is capable of manifesting reality from intent. The frequency going through the mobius coil sets up a chaos field, which interacts with the crystal to create scalar waves. There's something about 14Hz that makes these crystals respond in a positive way. 14Hz is also high alpha, the brain wave that humans tap into when they sleep or go into deep meditation. It's also the predominant brainwave kids have when they're at that stage in life when they learn everything quickly like languages, social rules, how to get around their parents, etc. The thing about meditation, as any guru can tell you, is planting the seed of intent while you're in an alpha state. The problem is, you must have your mind clear to be in an alpha state. After all, that's what meditation is all about... clearing your mind of all thought. As soon as you generate a thought, WHOOSH! you're no longer in alpha. I suppose it's a fail-safe, because if you could hold an intent while in deep meditation, or alpha, you can alter reality, and sometimes that's not a good idea for the rest of the people who don't share a potential psychopath's dreams. Also, anyone who practices meditation for years, and can discipline their mind to that extent, most likely has developed the higher brain function of wisdom and no longer needs anything but the basics.

I noticed that since I found a way to pump alpha waves to awake people, the awake people don't seem to need anything, partly because while alpha is flowing, you can't generate a thought. The end result is loving bliss for those near the source. (That damn fail-safe again.)

Anyway... this succor punch is designed to temporarily divorce you from the alpha waves while you make the intent by programming the device, allowing the device to transform your intent into reality.

Theoretically, this device will also repel negativity, including nasty people. If this is the only thing it can do, my efforts were well worth it.

it's beginning to look a lot like christmas

What you see here is a mobius powered ring generator with 16.65Hz frequency pumping through it through an amplified signal. The wok shaped frying pan makes a good reflector, driving the energy through the three pieces on top.

The ring generator, when powered up, allows you to distinctly feel energy flow from any orgone device you place on it. Anyone can feel how the energy flows using this device, even non-sensitives, like me.

After testing a wide variety of orgonite, it seems there is a major difference between shapes and resin type.
I have a number of pieces that are identical in every way but type of resin, and the darker Bondo brand fiberglass resin seems to have much more of a punch than clear resin. It's interesting because I always gravitated towards Bondo rather than clear, even though clear looks so cool and artsy. It seems my instincts were steering me towards the better resin all along, at least for the tactical, field stuff.

Another thing is the shape. The pyramid shapes seem to send the energy straight up through the top, while the cones send the energy up and out like a V. The round orb types tend to radiate energy from all around it, and the martini glass HHGs send the energy up and out in a wider pattern than the cone. The wine glass shaped lapis HHGs radiate energy up and out the top like a dome, which makes it ideal for under the bed use.

Stacking orgonite only improves the energy flow, which is what this picture is trying to show.

The ones with a copper pipe definitely extend range, and the power seems to depend on resin type, mass, and length of pipe. I'm thinking the ideal device for power and range would have to be a cone with a long copper pipe. Of course, other parameters have to be taken into consideration like metal size, metal ratios, crystal types, coil types, pipe diameter and length, and lots and lots of various combinations.

Perhaps the basic, cylindrical, 2 gallon cloudbuster that everyone has been building isn't the best shape. I'm thinking a ten pound elongated cone of orgonite made with Bondo with a copper pipe sticking out of the top might be the ticket because it would give you the biggest bang for the buck, using the economy of design to drive the energy from the massive base to the top point, like a laser.

With this new ring generator, I now have a tool that shows the shape, concentration, and energy dispersal of every orgonite device I have and will prove to be indispensible for future designs.

Didn't I say I was going to lay off building the big stuff and concentrate on the small stuff like TBs and HHGs?

orgone hookah III

The results are in.
In a previous post, I hooked up the orgone hookah to my car to study the effects of orgone enriched vapor and its effect on gas mileage. After a couple tanks of gas and hundreds of miles I concluded my gas mileage is increasing. After 60 miles my mileage increased by 1.5 miles per gallon. After 300 miles that figure changed to 3 miles per gallon increase.
It wouldn't be prudent to assume after 60 miles any change in gas mileage would be a solid indicator, so I extended the test for a couple tanks of gas. In this time I made it a point to not change my driving habits, tune up the car, or put additional air in the tires, so the mileage I was getting before the test was my baseline average and all parameters were identical, except for the installation of the orgone hookah.

I can safely conclude the only factor that gave me a higher mile per gallon was the orgone hookah.

Ok, so a 3 mile per gallon increase is not a phenomenal increase but it's an improvement just the same.

The next test will include fitting the car with a hydrogen generator. I'm thinking about using the orgone hookah as a vapor lock/flash suppressor/orgone inducer.

I'll keep ya posted.

orgone hookah II

I managed to put together the orgone hookah, but not before some design changes.
I realized the small TB I had planned to use for a base might not be the best idea for this project so I built a few prototype cores. The first core was a 1" diameter cylinder about 6" long with a coiled water-clear crystal. Since building this, I found some excellent glasses that had the exact dimensions I require. I had no choice but to build a larger core with a few refinements.
This core is a 2" by 6" cylinder encasing a 2" crystal wrapped with a toroidal mobius coil. The resin matrix is extremely dense with ultra fine metal particulates to make the coil kick some ass when I fire up the frequency.

To help atomize the water into vapor I attached an air stone to the intake.

So far, so good, but neoprene hose is not the best material for auto use. The melt point is too low and the fittings loosen up after awhile, but for this test it'll work fine.

The idea was to see if I can increase my gas mileage using vapor jet principles augmented with orgone. What this project turned into is a vapor jet housing an un-programmed succor punch as the catalyst.

I wonder if the car will program this device itself?

I'll do about 60 miles with this device and see what happens.