7g bubble

It's been short of a year and a half since I moved from resin-based field generators to bubble technology.  What started out as a study turned into a passion.

I built another one yesterday.  It took two months of designing and an hour or so of assembly but the effort was worth it.

 This unit is basically five layers.  The first layer consists of 2/3 mortar and 1/3 black iron oxide, making it an extremely dense base.  The next layer was mortar with a few handfuls of key dust.  Larger particles making it less dense than the first.  The next two layers were progressively less dense with aluminum chips with a final, neutral, layer of plaster.  The same cascading densities apply when constructing resin based orgonite.

But it's the goodies inside that makes the difference.  In the base layer I put a mirror with four neodymium magnets on the perimeter with a crystal array surrounded by citrine, shungite, and amethyst.  Directly over that is a succor punch with four magnets corresponding to the mirror magnets.  The rest of the goodies like DE, colloidal silver, ormus, rubicon, lemongrass, and tonka beans were placed at or near the succor punch.  The bubble is charged with a violet ray wand (VRW), which is basically a mini tesla coil, by two internal copper mesh pads at opposite ends of the unit.  The water used to mix the mortar/metal was run through a magnetic vortex.




I also included a sample from the previous bubble, which has the essence of all seven generations.

The most interesting part of this unit is the shekina crystal I mentioned in a previous post.  This item was placed directly over the succor punch in the fourth layer.  It not only contains my own DNA but five years worth of psychic fermentation until the solution crystallized.  I can't imagine what effects this crystal will produce, but I'm keeping my eye on it.










 



Theoretically, the qualities of these items should be boosted by the succor punch, which should be insanely boosted by the surrounding bubble.  The combination of inferred light and the VRW already shows astounding power after only one day.  I have eight more days worth of charging before this project is complete and fully charged.

Using an inferred light and VRW, it takes nine days to charge one of these things.  It's been said in order for a bubble to become fully charged it has to reach a temperature of 180 degrees.  Summer or winter, it takes that long to reach that temp.  Interesting.

So, what can these things do?  For starters, wake up the world and turn 5G into a healthy, life-enhancing thing that will bring enlightenment to the darkest corners of civilization.  Got any other requests?