Thursday, June 22, 2017

naturharmoniestation part 2

Well, hells bells, that was easy.
When I modified the PCV CB to fit a 4" stovepipe, I totally forgot I left all the hardware for the original 2" exhaust pipe in the PVC housing.  No major surgery needed.  It was just a matter of swapping pipes and adding a PVC cap to accommodate the NHS pipe.

Looks like a shotgun with a big ass silencer.

Hopefully, it's more than just good looks.  The field generator base might add some balls to the passive orgone accumulator NHS pipe, making it better than before.  Or not.  I added this modification when the weather was picture perfect.  How can you improve on perfect?  Um... how bout continued perfect weather?  We're supposed to have a dry day for the 22nd and rain for the 23rd.  I'll let it go for a few days to see if there's any demonstrable changes.  Either way, I'll end up setting this unit in a grounded bucket of water, the way it was designed, and note the observations.

About this setup...  The NHS pipe terminates about six inches from the base of the PVC pipe by nesting in a pipe connector in a ring of medium density orgonite.  The field generator at the base is connected to a solar powered frequency generator set at 14Hz.  I removed the three foot, insulated orgonite stuffed copper pipe, used as a central core, to fit the new pipe.  Without it, there's nothing in the center of the ring generator to resonate with, and this thing has little chance to take off properly.
 
I forgot to put the core back in, ok?  We all make mistakes but the beauty of this design is any mistake can be easily corrected.  Any part on this device can be swapped out easily and even a complete breakdown and rebuild can be performed in a matter of minutes.  Also, any off-the-wall modification can be installed just as quickly.

One such modification, that comes to mind, is the addition of a water core, housed in the PVC base and connected to ground.  This can satisfy the NHS pipe requirements as well as provide a neutral core for the field generator to resonate with.  Three inch PVC pipe should do nicely for this mod.

I'll keep ya posted.  

Wednesday, June 21, 2017

naturharmoniestation

The Naturharmoniestation, or NHS, is a device built by a company in Germany that claims it will clear electro-smog and chemtrails from the air in a radius of 14km and an altitude as high as 17km. That means it would take three of these units to clean the air in lower Manhattan. You know I had to try and build one.

 https://www.youtube.com/watch?v=TVfNLLCTdAY
The video is in German without subtitles, but the materials and methods were fairly easy to understand.  It's basically an orgone accumulator wrapped around a pipe using layers of felt and steel wool with heavy paper as a layering medium.  An orgone accumulator functions through layers of steel wool and an organic material in separate layers.  Separation of the layers is critical and even a single steel wool hair making contact with another layer can short the system and drastically reduce it's effectiveness.  By folding the steel wool and organic material in an envelope of heavy paper and wrapping it around the pipe eliminates that risk entirely.  Multiple wrappings in construction grade plastic produces a very effective three layer orgone accumulator that looks like the resonator on a car, and just as weatherproof.

The NHS website will sell you a unit, just like the pic, for about $550.  That got my attention!  I'll bet I could build one just as good for a fraction of that cost.  An online search got me all the parts I needed for less than fifty bucks but building the damn thing was a different story.  Unless you have a helper or two and a large working area, this project could get the better of you.  If you choose to do it outside, in the wind, pray you have the patience and eye-hand coordination to successfully put it together. 

I managed to build this one solo but there were times during this project I nearly lost my shit.  Building that IKEA home work station/gym is falling off a log simple, by comparison.  Working with steel wool, cutting felt to fit, and measuring and cutting paper envelopes in the wind made me wish I had three arms.  The first layer took an hour to assemble and 45min into it I was ready to throw the whole thing in the ditch. 

There's a layer of paper over the pipe, followed by felt, then a layer of steel wool, both wrapped in an envelope of brown paper exactly 60cm wide.  This is then tied up like a salami before the next set of layers.  There's three sets of layers making this a three frequency orgone accumulator.

I had to take a few liberties with the design.  Finding 2" shrink tube can only be found online and the steel pipe has a tendency to rust.  Packing tape will have to do to seal it, for now, and a coat of shellac on the exposed metal parts should retard oxidation.  This thing is designed to stand in grounded water, exposed to the elements for an extended period of time and I want this unit to last.  Since this unit is closely associated with water, I included a triskelion on the pipe before the first layer.

The method NHS uses to activate these pipes is mounted to a grounded bucket of water, which I intend to do, but I can't help wondering how this device would react with a cranked up field generator at it's base.  Like maybe as the pipe on the PVC CB or with a submerged field generator in the bucket of grounded water. 

I'll keep ya posted.


 
  

            

Tuesday, June 13, 2017

structured rum

I've been sitting on this rum wash for a few months and finally decided to run it.  Not so much because I needed rum or because I wanted to try out a new column but more like I wanted the fast fermenter for other projects and this stuff had to be dealt with.  Procrastination is one thing but sloth is a whole nuther level of ugly inefficiency and I ran out of excuses for not doing the distill.  That, and I wanted more rum to play with.

I'm glad I did because it turned out to be the best rum I ever made, demoting Captain Morgan to cabin boy.

I ran this batch in the usual way with a short column and thumper.  Past experience told me after the first 100ml, that I threw out, came a pint of high potency stuff with little flavor, which I set aside.  I used a gallon jar for collecting the hearts with close monitoring after the third quart.  When the tails started to make it's ugly appearance, I collected that in a separate jar, effectively segregating it from the primo stuff.  The result was short of a gallon of 150 proof rum with a clean taste and smell that's perfect for working with.

I started with a half pint and reduced the proof to 80 with reverse osmosis, magnetized vortex, structured water.  I tried samples using just the reverse osmosis water as well as well water and the difference was clear.  Where the spring water and reverse osmosis water gave the rum a decent taste, it was the structured water that gave the rum a clean, refreshing flavor without a bit of harshness.  The spring water has a total dissolved solids of 38 but the other two are chemically identical.  There should be no difference between the structured water and the unstructured... but there is.

The naturalist Viktor Schauberger called water a living organism, insisting that in its various forms, as blood, sap or biological water, it is the basis of all life.
In order to maintain its quality, water needs to behave like it does in a natural stream, dancing and cavorting in spirals and vortices, or in the ground, constantly moving sinuously in capillaries or circulating within its storage chambers. In a youthful stream, water is most active, producing vortices down the stream length, which act like the river’s immune system.

The system I used for making the structured water is similar to the vortices below the surface of any stream or river.  The only difference is the placement of four rare earth magnets where the vortex reaches the narrowest point.  I can only assume the pure, dead water structured in this way turns it into what the old moonshiners called branch water, natural stream water from the boonies, where they used to set up their operations.  I read somewhere that moonshiners insisted on branch water over any other water, including the stuff from a well, no matter how clean it was.  They knew it was the difference between so so corn liker and the real good stuff you save for company.  Now I know why.

Not terribly satisfied with making only real good rum, I decided to try some flavor to fill in the gap and make something truly dynamic.
I added orange and lime zest to a pint of rum and let it sit for a couple days and then added some almond extract.  Holy crap!  This shit is damn good but it's missing something I couldn't quite put my finger on.

As I sat on the patio in a state of rum contemplation, the Sound of Music ran through my memory banks in the form of "A spoonful of sugar helps the medicine go down."  That's it!  I put a teaspoon of white sugar in my mason jar of spiced rum and shook it til it dissolved and took a taste.  This is it!  A perfect balance of flavor on a pallet of deliciousness.  The orange and lime merged beautifully with the almond that complemented the delicate rum background with just enough sweet to bring it all together.

That night my neighbor came by to visit and the two of us drained a fifth, neat, one small glass at a time.  No shot shooting, no mixing with Coke.  Just sipping with the conversation revolving around how wonderful this stuff is.

To be sure, I'll be repeating this experiment in future distillations.  Do you think structured water will have a positive effect on plants or coffee?  I intend to find out.    

Sunday, June 11, 2017

Wednesday, June 07, 2017

some more orgone stuff

What you see to the left is part of a larger unit I'm putting together.  This is only the beginning stages and the whole project is far from total conceptualization.  What the finished project will look like is anybody's guess and what it's supposed to do is just as vague but the parts are small and easy to make, which means I can mix and pour something on my way through the garage to check on the wine I have on it's second ferment.

The bottom orb is the one I made a few weeks ago followed by two smaller orbs of a lessor density than the first.  The three smaller units are six halves from left over resin, three medium density and three high density.  The close proximity of medium and high density puts out an energy field even I can feel, which made a natural choice to mount them on top.  The whole thing is held in place with copper pipe to satisfy the principal of metal on the inside.  When the time comes I'll complete it with organic material on the outside to satisfy the other half of that rule.
This has been running on 7.83Hz since I made the first orb.   

I still have to play with the order to find out what combination works best.  At this point, there's a gentle buzz flowing through the top.  I know I can do better but like I say, it's not even a concept yet.  The thought occurred to me that I might be able to boost that ring generator by pre-forming some medium to low density tiles to fit the perimeter.  That would be quick, easy, and painless.  At this stage I can't say if I'll be using this ring or opt for something completely different.  My money's on something completely different.